Tel: (86+)15162718808 info@nhjm.com; bolanggary@gmail.com

اللغة

الرئيسية » منتجاتنا » آلة التعبئة
  • /img/zyg_8_type_weighing_oil_filling_machine.jpg

Weighing Oil Filling Machine

اتصل بنا

  • المنتج مقدمة
  • معلمات المنتج
  • Main components and material
  • التحقيق
وصف المنتج

The machine uses a straight line weighing filling, for the 8 structure.

Conveyor belt for intermittent movement, each time take 8 intervals, each interval put a plastic bucket; photoelectric detection to have eight plastic drums to reach the filling station, the plastic bucket below the corresponding 8 up to 8 Empty bucket top, so that the bottom of the barrel to leave the conveyor belt, fell on the table above; said the table on their respective empty barrels first peeled operation, and then eight filling head open, start pouring, when the filling volume close to 5L (The specific size can be set), filling the flow automatically smaller, in order to improve the filling accuracy. When a bucket reaches the filling capacity, the corresponding valve is closed; the weighing system will carry out the final inspection of the weight of the barrel. If the filling capacity is greater than the set upper limit or less than the set lower limit, the system will alarm and show the actual The weight of the filling; manual removal of the bottle, and then let the system re-work; if no alarm situation, 8 said the table at the same time down to complete the filling of the plastic bucket down to the filling, the conveyor belt sent back, Empty bucket again into the filling station for filling.

معلمات المنتج

Production capacity: 650 barrels / hour

Filling volume: 5L

Number of head: 8 head

Quantitative error: ≤0.3%

Air consumption: 0.3-0.4m3 / min Pressure: 0.5 ~ 0.6MPa

Power: 380v 50Hz three-phase four-wire system

الطاقة: شنومكو

Dimensions: 1800 × 850 × 1900

الوزن: 800kg

Main components and material

لا.

الاسم

Type or Material

الموردين

1

المجلس التشريعي الفلسطيني

FX3U-30MT

Japan Mitsubishi

2

الشاشات التي تعمل باللمس

GS2107

Japan Mitsubishi

3

Weighing sensor

METTLER TOLEDO

4

الكهروضوئي التبديل

S18SN6FF50

Korea Autonics

5

pneumatic components

Taiwan AIRTAC

6

الملف اللولبي صمام

Shanghai JULIANG

7

stainless steel pump

CH2-50

Hangzhou South Pump

8

كهرباء، مكونات

فرنسا شنايدر

9

conveying system

مكونات

Nantong Bo Lang

10

Synchronous Transmission

مكونات

Nantong Bo Lang

11

tank and pipe

assembly (304 #)

Nantong Bo Lang

12

side panels, sealing plate

assembly (304 #)

Nantong Bo Lang

13

رف

components (304 #)

Nantong Bo Lang

Other parts that come into contact with the bottle: 304 # stainless steel or nylon

Countertop and side panels: 304 # stainless steel

Single filling رئيس, the output of 800-1200 bottles / hour, filling machine price $16150;

Four filling رئيس, the output of 2500-3000 bottles / hour, filling machine price of $24920;

اتصل بنا

القائمة
G|translate Your license is inactive or expired, please subscribe again!