Tel: + 86 15162718808 info@nhjm.com; bolanggary@gmail.com

Taalvoorkeur

Tuis » produkte » vul masjien
  • /img/zyg_8_type_weighing_oil_filling_machine.jpg

Weighing Oil Filling Machine

Kontak Ons

  • Produk Inleiding
  • Produk parameters
  • Main components and material
  • ONDERSOEK
Produk Beskrywing

The machine uses a straight line weighing filling, for the 8 structure.

Conveyor belt for intermittent movement, each time take 8 intervals, each interval put a plastic bucket; photoelectric detection to have eight plastic drums to reach the filling station, the plastic bucket below the corresponding 8 up to 8 Empty bucket top, so that the bottom of the barrel to leave the conveyor belt, fell on the table above; said the table on their respective empty barrels first peeled operation, and then eight filling head open, start pouring, when the filling volume close to 5L (The specific size can be set), filling the flow automatically smaller, in order to improve the filling accuracy. When a bucket reaches the filling capacity, the corresponding valve is closed; the weighing system will carry out the final inspection of the weight of the barrel. If the filling capacity is greater than the set upper limit or less than the set lower limit, the system will alarm and show the actual The weight of the filling; manual removal of the bottle, and then let the system re-work; if no alarm situation, 8 said the table at the same time down to complete the filling of the plastic bucket down to the filling, the conveyor belt sent back, Empty bucket again into the filling station for filling.

Produk parameters

Production capacity: 650 barrels / hour

Filling volume: 5L

Number of head: 8 head

Quantitative error: ≤0.3%

Air consumption: 0.3-0.4m3 / min Pressure: 0.5 ~ 0.6MPa

Power: 380v 50Hz three-phase four-wire system

Krag: 1.5Kw

Dimensions: 1800 × 850 × 1900

Gewig: 800kg

Main components and material

Aantal

Naam

Type or Material

verskaffers

1

PLC

FX3U-30MT

Japan Mitsubishi

2

touch screen

GS2107

Japan Mitsubishi

3

Weighing sensor

METTLER TOLEDO

4

Foto-elektriese skakelaar

S18SN6FF50

Korea Autonics

5

pneumatic components

Taiwan AIRTAC

6

klep

Shanghai JULIANG

7

stainless steel pump

CH2-50

Hangzhou South Pump

8

electrical components

Frankryk Schneider

9

conveying system

komponente

Nantong Bo Lang

10

Synchronous Transmission

komponente

Nantong Bo Lang

11

tank and pipe

assembly (304 #)

Nantong Bo Lang

12

side panels, sealing plate

assembly (304 #)

Nantong Bo Lang

13

rek

components (304 #)

Nantong Bo Lang

Other parts that come into contact with the bottle: 304 # stainless steel or nylon

Countertop and side panels: 304 # stainless steel

let wel:

Single filling kop, the output of 800-1200 bottles / hour, filling machine price $ 16150;

Four filling kop, the output of 2500-3000 bottles / hour, filling machine price of $ 24920;

Kontak Ons

Spyskaart
G|translate Your license is inactive or expired, please subscribe again!